HP zx6000 Booting HP-UX
1 0 0x0000A4 0x0000000000000000 start memory discovery
1 0 0x000081 0x0000000000000000 start I/O discovery
***********************************************************
* ROM Version : 02.31
* ROM Date : 03/11/2004
* BMC Version : 01.52
***********************************************************
1 0 0x0000A4 0x0000000000000000 start memory discovery
1 0 0x000014 0x0000000000000000 CPU0 starting cell relocation
1 0 0x000009 0x0000000000000000 CPU0 launch EFI
1 0 0x000207 0x00000000000E003D CPU0 starting EFI
EFI version 1.10 [14.61]
EFI64 Running on Intel(R) Itanium Processor Family
EFI 1.10 IPF zx6000/rx2600/zx2000 1.22 [Thu Mar 11 14:22:35 2004] - HP
Copyright (c) 2000-2002 Broadcom Corporation
Broadcom NetXtreme Gigabit Ethernet EFI driver v3.0.7
Loading 'FPSWA'...
Loading 'lsi1030'...
Loading 'gigundi'...
2 0 0x00020B 0x0000000000000006 EFI Launching Boot Manager
Scsi(Pun0,Lun0) HP 73.4GST373453LC HPC3 (320 MBytes/sec)
Scsi(Pun1,Lun0) HP 73.4GST373453LC HPC3 (320 MBytes/sec)
Scsi(Pun2,Lun0) IBM IC35L073UCDY10-0S27F (320 MBytes/sec)
Searching for device at Scsi(PunD,Lun0)
EFI Boot Manager ver 1.10 [14.61] Firmware ver 2.31 [4334]
Please select a boot option
DVD
FreeBSD 8.2
Debian GNU/Linux
HP-UX Primary Boot: 0/1/1/0.1.0
EFI Shell [Built-in]
Boot Option Maintenance Menu
System Configuration Menu
Use ^ and v to change option(s). Use Enter to select an option
Loading.: HP-UX Primary Boot: 0/1/1/0.1.0
Starting: HP-UX Primary Boot: 0/1/1/0.1.0
(C) Copyright 2004 Hewlett-Packard Development Company, L.P.All rights reserved
HP-UX Boot Loader for IPF -- Revision 2.018
Press Any Key to interrupt Autoboot
\EFI\HPUX\AUTO ==> boot vmunix
Seconds left till autoboot - 0
AUTOBOOTING...
AUTO BOOT> boot vmunix
> System Memory = 24564 MB
loading section 0
................................................ (complete)
loading section 1
............ (complete)
loading symbol table
loading System Directory (boot.sys) to MFS
....
loading MFSFILES directory (bootfs) to MFS
......
Launching /stand/vmunix
SIZE: Text:24488K + Data:5927K + BSS:5100K = Total:35516K
Console is on a Serial Device
Booting kernel...
HP-UX will call firmware in physical-addressing mode
Memory Class Setup
-------------------------------------------------------------------------
Class Physmem Lockmem Swapmem
-------------------------------------------------------------------------
System : 24564 MB 24564 MB 24564 MB
Kernel : 24564 MB 24564 MB 24564 MB
User : 23259 MB 20270 MB 20350 MB
-------------------------------------------------------------------------
Loaded ACPI revision 2.0 tables.
NOTICE: cachefs_link(): File system was registered at index 4.
NOTICE: nfs3_link(): File system was registered at index 7.
Boot device's HP-UX HW path is: 0/1/1/0.1.0
igelan1: INITIALIZING HP PCI 1000Base-T Core at hardware path 0/1/2/0
System Console is on the Built-In Serial Interface
Logical volume 64, 0x3 configured as ROOT
Logical volume 64, 0x2 configured as SWAP
Logical volume 64, 0x2 configured as DUMP
Swap device table: (start & size given in 512-byte blocks)
entry 0 - major is 64, minor is 0x2; start = 0, size = 16777216
Starting the STREAMS daemons-phase 1
Checking root file system.
file system is clean - log replay is not required
Root check done.
Create STCP device files
Starting the STREAMS daemons-phase 2
$Revision: vmunix: B11.23_LR FLAVOR=perf Fri Aug 29 22:35:38 PDT 2003 $
Memory Information:
physical page size = 4096 bytes, logical page size = 4096 bytes
Physical: 25154312 Kbytes, lockable: 19166692 Kbytes, available: 22226224 Kbytes
/sbin/ioinitrc:
/dev/vg00/lvol1:file system is clean - log replay is not required
/sbin/krs_sysinit:
* The module 'rng' has been loaded.
* The module 'ipf' has been loaded.
insf: Installing special files for ipmi instance 0 address 250/0
/sbin/bcheckrc:
Checking for LVM volume groups and Activating (if any exist)
Volume group "/dev/vg00" has been successfully changed.
Checking vxfs file systems
vxfs fsck: /dev/vg00/lvol3:sanity check: root file system OK (mounted read/write)
vxfs fsck: /dev/vg00/lvol1:/dev/vg00/lvol1 is currently mounted
vxfs fsck: /dev/vg00/lvol1:sanity check: /dev/vg00/lvol1 already mounted
vxfs fsck: /dev/vg00/lvol4:sanity check: /dev/vg00/lvol4 OK
vxfs fsck: /dev/vg00/lvol5:sanity check: /dev/vg00/lvol5 OK
vxfs fsck: /dev/vg00/lvol6:sanity check: /dev/vg00/lvol6 OK
vxfs fsck: /dev/vg00/lvol7:sanity check: /dev/vg00/lvol7 OK
vxfs fsck: /dev/vg00/lvol8:sanity check: /dev/vg00/lvol8 OK
Cleaning /etc/ptmp...
/sbin/auto_parms: DHCP access is disabled (see /etc/auto_parms.log)
HP-UX Start-up in progress
__________________________
Configure system crash dumps ........................................ OK
VxVM device node check .............................................. OK
VxVM general startup ................................................ OK
VxVM reconfiguration recovery ....................................... OK
Mount file systems .................................................. OK
Setting hostname .................................................... OK
Start Kernel Logging facility ....................................... OK
Set privilege group ................................................. N/A
Display date ........................................................ N/A
Save system crash dump if needed .................................... N/A
Start evp ........................................................... OK
Enable auxiliary swap space ......................................... OK
Start syncer daemon ................................................. OK
Start Utmp Daemon : manages User Accounting Database ................ OK
Configure Loopback interfaces (lo0) ................................. OK
Start IP Security (IPSec) ........................................... OK
VxVM volume recovery start .......................................... OK
Configuring all unconfigured software filesets ...................... OK
Configuring PFIL .................................................... OK
Starting IPFilter ................................................... OK
Configuring Install Time Security ................................... N/A
Recover editor crash files .......................................... OK
Clean UUCP .......................................................... OK
List and/or clear temporary files ................................... OK
Clean up old log files .............................................. OK
Start system message logging daemon ................................. OK
Start pty allocator daemon .......................................... OK
Configuring OLA/R interface ......................................... N/A
Start network tracing and logging daemon ............................ OK
Configure HP igelan Gigabit Ethernet interfaces ..................... OK
Configure HP iether 100BT/Gigabit Ethernet interfaces ............... OK
Configure HP gelan Gigabit Ethernet interfaces ...................... OK
Configure INTEL 100BASE-T interfaces ................................ OK
Create PCI FDDI device files. ....................................... OK
Configure HP 100BASE-T interfaces ................................... N/A
Configure VLAN interfaces ........................................... OK
Configure LAN interfaces ............................................ OK
Configure LAN interfaces for IPv6 ................................... OK
Starting DHCPv6 Server daemon ....................................... N/A
Configuring DHCPv6 Interfaces ....................................... OK
Start name server daemon ............................................ N/A
Starting HP-UX Secure Shell ......................................... OK
Start NFS core subsystem ............................................ OK
Start NIS+ server subsystem ......................................... OK
Start NIS+ client subsystem ......................................... OK
Start NIS server subsystem .......................................... OK
Start NIS client subsystem .......................................... OK
Start NFS client subsystem .......................................... OK
Start the Trusted Mode with NIS+ subsystem .......................... N/A
Start multicast routing daemon ...................................... N/A
Start Internet services daemon ...................................... OK
Start dynamic routing daemon ........................................ N/A
Start router discover protocol daemon ............................... N/A
Configuring PPP Interface ........................................... OK
Configuring PPPoE ................................................... N/A
Start RARP protocol daemon .......................................... N/A
Start remote system status daemon ................................... N/A
Start IPv6 router advertisement daemon .............................. N/A
Starting mail daemon ................................................ OK
Starting outbound connection daemons for DDFA software .............. N/A
Start SNMP Master Network Management daemon ......................... OK
Start OSPF MIB Network Management subAgent .......................... N/A
Start SNMP HP-UNIX Network Management subAgent ...................... OK
Start SNMP IPv6 Network Management subAgent ......................... OK
Start SNMP MIB-2 Network Management subAgent ........................ OK
Start Native Adapter Agent .......................................... OK
Start SNMP Trap Dest Network Management subAgent .................... OK
Start DCE daemons ................................................... N/A
Start SNMP PCI FDDI Network Management subAgent ..................... OK
Start RPC daemon if needed .......................................... OK
Start CIM cimserver subsystem ....................................... OK
Initialize capacity on demand ....................................... N/A
Starting ISEE hpservices mad daemon. ................................ N/A
Starting X Font Server at TCP port 7000 ............................. N/A
Start vt daemon ..................................................... N/A
Starting kks daemon ................................................. OK
Start time synchronization .......................................... OK
Start accounting .................................................... N/A
Install/Load XF86 DLKM Helper Modules ............................... OK
Starting the password/group assist subsystem ........................ OK
Starting HP Disk Array Manager daemons. ............................. OK
Start print spooler ................................................. N/A
Start clock daemon .................................................. OK
Run Security Patch Check Utility .................................... N/A
Start diagnostic subsystem .......................................... OK
Start environment monitoring daemon ................................. OK
Start auditing subsystem ............................................ N/A
Start audio server daemon ........................................... N/A
Start USB hub daemon ................................................ OK
SAM System administration configuration ............................. OK
Initialize Software Distributor agent daemon ........................ OK
Starting servicecontrol manager daemons ............................. OK
Configure HP RAID SA interfaces ..................................... N/A
Copy processor logs to /var/tombstones .............................. OK
Starting Event Monitoring Service ................................... OK
Start EMS SNMP subagent ............................................. OK
Configure HP Fibre Channel Mass Storage interfaces .................. OK
Configuring Ultra320 SCSI Mass Storage interfaces ................... OK
Starting the RST EMS listener ....................................... N/A
Configure HP Fibre Channel Tachyon TL/TS Mass Storage interfaces .... OK
Configuring HP Fibre Channel FCD Mass Storage interfaces ............ OK
VVR - Starting Communication Daemon ................................. N/A
Starting VERITAS Enterprise Administrator Service (vxsvc) ........... OK
Start NFS server subsystem .......................................... OK
Start X print server(s) ............................................. N/A
Starting HP-UX Apache-based Web Server .............................. N/A
Starting HP-UX Tomcat-based Servlet Engine .......................... N/A
Starting HP-UX Webmin-based Admin ................................... N/A
Starting the HPUX Webproxy subsystem ................................ N/A
Starting HP-UX XML Web Server Tools ................................. OK
Start kwdbd ......................................................... N/A
Start CDE login server .............................................. N/A
Starting PRNGD (Pseudo Random Number Generator Daemon) .............. N/A
The system is ready.
tempest [HP Release B.11.23]
Console Login:
|